Samsung SCX-4720F-XIP - Manual (Page 139)

S
CANNING
6.12
Setting Network Scan Timeout
If Network Scan on your computer does not send a refresh
request and does not scan a job within the timeout period
configured in Network Scan, the entry your machine returns to
the Standby mode.
To set the Network Scan timeout option:
1
Press Menu until “Machine Setup” appears on the top line
of the display.
2 Press the scroll buttons until “Scan Timeout” appears on
the bottom line and then press Enter.
3
Enter the desired timeout value and press Enter.
The default value is 30 minutes. Users can enter any value
from 1 minute to 1,440 minutes.
4 The change will be broadcast over the network and
effective to all clients connected to the network.