Samsung SCX-4720F-XIP - Manual (Page 155)

F
AXING
(SCX-4720F/4720FS O
NLY
) 7.16
Receiving Automatically in Ans/
Fax Mode
To use this mode, you must attach an answering machine to the
EXT jack on the back of your machine. See page 2.11.
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax
tone on the line, it automatically starts to receive the fax.
N OTES :
• If you have set your machine to Ans/Fax mode and your
answering machine is switched off, or no answering machine is
connected to EXT jack, your machine automatically goes into Fax
mode after a predefined number of rings.
• If your answering machine has a ‘user-selectable ring counter’,
set the machine to answer incoming calls within 1 ring.
• If you are in Tel mode (manual reception) when the answering
machine is connected to your machine, you must switch off the
answering machine, or the outgoing message from the
answering machine will interrupt your phone conversation.
Receiving Manually Using an
Extension Telephone
This features works best when you are using an extension
telephone connected to the EXT jack on the back of your
machine. You can receive a fax from someone you are talking to
on the extension telephone without going to the fax machine.
When you receive a call on the extension phone and hear fax
tones, press the keys 9 on the extension telephone. The
machine receives the document.
Press the buttons slowly in sequence. If you still hear the fax
tone from the remote machine, try pressing 9 once again.
9 is the remote receive code preset at the factory. The first
and the last asterisks are fixed, but you can change the middle
number to whatever you wish. For details about changing the
code, see page 7.4