Samsung SCX-4720F-XIP - Manual (Page 282)

U
SING
Y
OUR
M
ACHINE ON A
N
ETWORK
D.5
D
9
In the Enter a port name field, enter the shared name.
10 Click OK and click Close.
11 For Windows NT 4.0, click OK.
For Windows 2000/XP, click Apply and click OK.
Setting Up a Network-Connected
Machine
You have to set up the network protocols on the machine to use
it as your network printer. Setting protocols can be
accomplished by using the supplied network program. Please
refer to the SyncThru User’s Guide.
You can configure the basic network parameters through the
machine’s control panel. Use the machine’s control panel to do
the following:
• Print a Network Configuration Page
• Enable or disable network protocols (IPX/SPX)
• Configure TCP/IP
• Configure IPX frame types
Configuring Network Parameters on the
Control Panel
Supported Operating Systems
N OTE : The operating systems supported by the network card may
be different from the operating systems supported by the machine.
The following table shows the network environments supported by
the machine.
Item Requirements
Network Interface 10/100 Base-TX or 802.11b Wireless
LAN