Installing samsung software – Samsung SCX-4720F-XIP User Manual
Page 62
G
ETTING
S
TARTED
2.29
2
Installing Samsung Software
N
OTES
:
• Cancel the “New Hardware Found” window when your computer
boots up.
• Make sure that your machine is turned on and connected to your
computer’s parallel port or USB port before installing
software. Windows 95 and Windows NT 4.0 do not support the
USB connection.
1
Insert the supplied CD-ROM into your CD-ROM drive.
The CD-ROM should automatically run, and an installation
window appears.
If the installation window does not appear, click Start and
then Run. Type X:Setup.exe, replacing “X” with the letter
of your drive and click OK.
N
OTE
: If your machine is not already connected to the computer,
when the following window opens, connect your machine to the
computer and turn the machine on. Then click
Next.
If the machine is already connected and turned on, this screen will
not appear. Skip to the next step.