Samsung SPS4223X-XAA - Manual (Page 15)

English-15
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
1. Press the POWER button on the remote control.
The message “Menu language, Channels and Time will be set.” is displayed.
Press the ENTER button, then “Select the language of the OSD” menu is
automatically displayed.
2. Press the ENTER button to enter the language.
Press the … … or † † button to select language, then press the ENTER button.
“Select the antennas to memorize.” menu is automatically displayed.
3. Press the … … or † † button to memorize the channels of the selected connection.
Press the ENTER button to select “Start”.
➢
If the antenna is connected to ANT 2 IN (AIR), select “Air” and if it is connected to
ANT 1 IN (CABLE), select “Cable”.
➢
If both ANT 2 IN (AIR) and ANT 1 IN (CABLE) are connected, select the “Air + Cable”.
➢
In Cable mode, you can select the correct signal source among STD, HRC, and IRC
by pressing the …
… or † † button, then press the ENTER button.
Contact your local cable company to identify the type of cable system that exists in your
particular area.
Operation
Menu language, Channels
and Time will be set. i
Start
Select the language of the OSD.
Menu Language :
Plug & Play
Enter Skip
English
Spanish
French
Move
Select the antennas to memorize.
Air
Cable
Air + Cable
Plug & Play
Enter Skip Move
Start
Start
Select the cable system.
STD
HRC
IRC
Plug & Play
Enter Skip Move
Start
Continued...
BN68-00991J-00Eng 5/12/06 12:25 PM Page 15