Samsung ML-3471ND-XAR - Manual (Page 39)

Devices_ 39
Using template files
You can save the settings you often use as a template to start discovery with later.
To add a template:
1. From SyncThru™ Admin 5, click Devices menu > Discovery > Discovery Settings.
2. Specify the discovery method you want to use (See "Discovery methods" on page 37).
3. Click the Save as Template button. You can now use this template later.
To use a template:
1. From SyncThru™ Admin 5, click Devices menu > Discovery > Discovery Settings.
2. Click the Load Template button. You can see all the templates stored in SyncThru™ Admin 5.
3. Select the template you want and click the Load button. Now you can see the settings of the selected template and
start discovery with the saved settings.
To delete a template:
1. From SyncThru™ Admin 5, click Devices menu > Discovery > Discovery Settings.
2. Click the Load Template button. You can see all the templates stored in SyncThru™ Admin 5.
3. Select the template you want to remove and click the Delete button.
Discovery History
Discovery History shows details for the discovery status, including the discovered device list, and you can check all the
scheduled discoveries here.
When discovery is running, you can see the task status in Active Tasks as well as in Discovery History. You can pause
or stop the action in those menus.
1
History Shows accumulated history for discoveries (See "History" on page 40).
2
History Summary/
Configure Shows the status of the discovery with a progress bar (See "History
Summary/Configure" on page 40).
3
Found Device List Shows all the discovered devices in the list (See "Found Device List"
on page 40).
4 Device Information Shows basic information about the devices.