Samsung ML-3471ND-XAR - Manual (Page 86)

Troubleshooting_ 86
HTTP security
Email settings
CODE SEVERITY REASON SOLUTION
17001
Cannot switch
authentication on
while no users are
present in the
system Warning You cannot configure
authentication because there
is no user account. If you enable authentication, SyncThru™
Admin 5 requires a login ID and password
when you open SyncThru™ Admin 5.
Please make sure that SyncThru™ Admin 5
has a user account.
1 From SyncThru™ Admin 5, click
Settings menu > Settings > User
Management > User accounts >
Account List.
2 Check the Account List.
3 If there is no account, you need to
configure a user account first (See
"User Accounts" on page 70).
4 Try again.
17002
Cannot switch
authentication on
while no users with
"Admin" role Warning You cannot configure
authentication because there
is no user account with the
role of "Admin". Please make sure that any user account has
an Admin role.
- Go to Settings menu Settings > User
Management > User Accounts and check to
see if a user account has Admin role. You can
see Roles column in the Account List.
- If there is no user account with an Admin
role. You need to configure at least one user
account with an Admin role.
1 From SyncThru™ Admin 5, click
Settings menu > Settings > User
Management > User accounts >
Account List.
2 Check to see if a user account has
Admin role. You can see the Roles
column in the Account List.
3 If there is no user account with an
Admin role, you need to configure at
least one user account with an Admin
role (See "User Roles" on page 71).
4 Try again.
17003
Wrong certificate
file Warning The certificate you have tried
to upload has an incorrect
format. Please check to see if your certificate has the
correct format.
CODE SEVERITY REASON SOLUTION
19000
Error sending test
message Warning Your configuration for SMTP
server may be incorrect. Please check your SMTP server configuration
or contact your network administrator. You
may need to make sure of the following:
• SMTP server address and port number.
• SMTP requires authentication.
• If your SMTP server requires
authentication, the login ID and password
should be correct.
If you have no problem with the server
configuration, you need to check your network
environment, such as the firewall. You may
need your network administrator's support.