Samsung EV-NX1000BJPUS - Manual (Page 102)

101
Wireless network
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a
WLAN. You can also configure network settings.
Connecting to a WLAN
1 Rotate the mode dial to
B.
2 Select , , , or .
3 Press [
m], and then select Wi-Fi Setting.
• In some modes, press [ m] or follow the on-screen
instructions until the Wi-Fi Setting screen appears.
• The camera automatically searches for available AP devices.
4 Select an AP.
Wi-Fi Setting
Exit Manual
Refresh
Samsung 1
Samsung 2
Samsung 3
Samsung 4
Icon/Option Description
Refresh Refresh connectable APs.
Ad hoc AP
Secured AP
WPS AP
Signal strength
WPS button connection Connect to a WPS AP.
Add wireless network Add an AP manually.
• Press [
f] to open network setting options.
• When you select a secured AP, a pop-up window appears. Enter
the required passwords to connect to the WLAN. For information
about entering text, refer to "Entering text". (p. 105)
• When a login page appears, refer to "Using the login browser".
(p. 103)
• When you select an unsecured AP, the camera will connect to the
WLAN.
• If you select a WPS profile supported AP, select WPS PIN
connection, and then enter a PIN on the AP device. You can
also connect to a WPS profile supported AP by selecting WPS
button connection on the camera, and then pushing the WPS
button on the AP device.