Samsung EV-NX1000BJPUS - Manual (Page 77)

Shooting Functions
76 76
Shooting Functions Shooting Functions
In order to capture a realistic photo of a subject, the amount of light
should be constant. When the light source varies, you can use a flash
and supply a constant amount of light. Select appropriate settings
according to a light source and a subject.
To set flash options, In Shooting mode, press [ f] →
Flash
→
an option.
Flash options
Icon Description
Off: Do not use the flash.
Smart Flash: The camera automatically adjusts the brightness
of the flash according to the amount of light in the surrounding
environment.
Auto: The flash automatically fires in dark places.
Auto Red-eye: The flash automatically fires and prevents
red-eyes.
Fill in: The flash fires whenever you capture a photo.
Fill-in Red: The flash fires whenever you capture a photo and
prevents red-eyes.
Icon Description
1st Curtain: The flash fires
immediately after the shutter
opens. The camera captures a
photo of a subject earlier in an
action sequence clearly.
Ball moving direction
2nd Curtain: The flash fires just
before the shutter closes. The
camera captures a photo of a
subject later in an action sequence
clearly.
Ball moving direction
• The available options may differ depending on the shooting mode.
•
There is an interval between two bursts of the flash. Do not move until the
flash fires a second time.
•
Flash options and the flash intensity adjustment are available only when
you use the NX exclusive external flash.
•
You can capture a photo with a flash that is not fully charged, but it is
recommended to use a fully charged flash.
Use only Samsung-approved flashes. Using incompatible flashes may
damage your camera.
Flash