Samsung SM-N900TZWETMB - Manual (Page 229)

Connections 223
Enabling the USB 3.0 Connection
1. Connect the USB 3.0 cable to an active 3.0 USB port.
Important! The 3.0 configuration screens will not be displayed
if you cable is not plugged into an Active USB 3.0
port or if it is plugged into a USB 2.0.
2. In a single motion, touch and drag the Status bar to the
bottom of the screen to open the Notifications panel.
3. Tap the Media device (USB3.0) field to place a
checkmark and active the USB connectivity mode
.
4. Read the on-screen information and tap Use USB 3.0 to
initiate the mode.
To return to USB 2.0 connectivity mode:
Ⅲ Tap either the MTP or PTP fields to re-enable USB 2.0
connectivity.
USB Tethering
This option allows you to share your device’s mobile data
connection via a direct USB connection between your device
and a single computer. The Mobile HotSpot connectivity is a
wireless version of this same functionality and allows you to
provide Internet connectivity to multiple devices.
Note: You can not mount your device’s microSD card to your
computer while using the USB tethering feature.
If additional software or USB drivers are required,
navigate to:
http://www.samsung.com/us/support/
downloads .