Network setup, Authentication, 78 network setup 78 – Samsung SCX-6555N-XBG User Manual

Page 78

Advertising
background image

78

NETWORK SETUP

You may set up the network with the machine's touch screen. Before doing

that, you must have the information concerning the type of network

protocols and computer system you use. If you are not sure which setting to

use, contact your network administrator to configure this machine network.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, enter

password and press OK.

3. Press the Setup tab > Network Setup.

AUTHENTICATION

This feature lets you control and lock all outgoing data, or change the

password.
1. Press Machine Setup on the control panel.
2. Press Admin Setting. When the login message pops up, then enter

password and press OK.

3. Press the Setup tab > Authentication.

OPTION

DESCRIPTION

TCP/IP Protocol

Select appropriate protocol and configure

parameters to use the network environment.

There are lots of parameters to be set,

therefore, if you are not sure, leave as it is,

or consult the network administrator.

Ethernet Speed

Configure the network transmission speed.

Clear Setting

Reverts the network settings to the default values.

802.1x

You can select the user authentication for network

communication.

For details information consult the network admin-

istrator.

IPv6

Selects this option to use the network environment

through IPv6.

OPTION

OPTION

DESCRIPTION

Authentication

Mode

No

Authentication

Mode

It disables Authentication Mode.

Network

Accounting

It enables the authentication mode
which can be used for Job

Accounting Plug-in the

SyncThru™ Web Admin Service.

Standard

Accounting

You can set the local account for a

certain user. If the user with that

account performs the printing job,

the machine counts it.

Foreign Device

Interface

When you install the optional FDI

kit, select Foreign Device

Interface Configuration Setup to

activate it.

Job Timer: If there is not

enough credit, you can set the

machine to cancel a job right

away or wait a designated

amount of time for a deposit.

Print Job Control: When it is

enabled, the both computer

printing and copying are

possible since the credit

remains. With Disable, only

the copy printing job needs the

credit. (which means a

computer printing a report or a

fax job needs no credits)

Inhibit Services: When no

credit is left, the machine

disables the copy job only with

Copy Only. With All Services,

scanning service and copy job

are disabled.

Advertising
This manual is related to the following products: