Samsung SCX-6555N-XBG - Manual (Page 85)

85
Replacing the imaging unit
1. Open the side cover.
2. Open the front cover.
3. Turn the cartridge locking lever toward the right until you hear a 'click', to
release the toner cartridge.
4. Lift the locking lever and pull the toner cartridge out.
5. Pull the used imaging unit out.
6. Remove the new imaging unit from its bag.
7. Open the carefully pull the seal tape out of the cartridge.
8. Thoroughly shake the imaging unit side to side five or six times.
9. Unpack the new imaging unit and slide it into place, making sure not to
touch the surface of the imaging unit.
The toner cartridge must be removed to replace the imaging unit.
If toner gets on your clothing, wipe it off with a dry cloth and wash
clothing in cold water. Hot water sets toner into fabric.
Do not touch the green part, midside of the imaging unit. Use the
handle on the cartridge to avoid touching this area.