Image tab, Copying originals, Changing the settings for each copy – Samsung SCX-6555N-XBG User Manual

Page 42: Changing the size of originals, S. (see "changing the

Advertising
background image

42

Image tab

Erase Edge: Allows you to erase punch holes, staple marks, and

fold creases along any of the four documents edges. (See "Erasing

edges" on page 47.)

Erase Background: Prints an image with no background. (See

"Erasing background images" on page 47.)

Margin Shift: Creates a binding edge for the document. (See

"Shifting margins" on page 47.)

COPYING ORIGINALS

This is the normal and usual procedure for copying your originals.
1. Press Copy from the Main screen.
2. Place originals, face up, in the DADF, or you can use the scanner glass

with a single original document face down.

3. Adjust the settings for each copy such as Original Size, Reduce/

Enlarge, Duplex and more. (See "Changing the size of originals" on

page 42., see "Copying on both sides of originals (Duplex)" on page 43.)

4. Select the tray by pressing the appropriate tray on screen.

5. Enter the number of copies using the number keypad, if necessary.

6. Press Start on the control panel to begin copying.

CHANGING THE SETTINGS FOR EACH COPY

On the Basic tab of the Copy screen, you can select copy features before

starting to copy.

Changing the size of originals

Press the Basic tab > Original Size, then use left/right arrows to set the

original size.
Press more to see the detail values.

Custom: Selects the scanning area of the original. Press the

cardinal point arrows to set the size.

Auto: Automatically detects the size of originals, but this option

supports only when originals are Legal, Letter, or A5 sized. If the

originals is mixed-sized, then the machine detects the largest original

size and select the largest-sized paper in the tray.

Mixed Size (Letter & Legal): Allows for the use of both of Letter and

Legal sized papers together, and the machine uses the proper-sized

paper from several trays. For example, if the originals are total 3

pages, 1st page is the letter-sized paper, 2nd page is the legal-sized

If you want to copy originals on the scanner glass and copy more than

two copies, the message Another Page? appears after the first page

copied. At this time, if you select No, the machine starts copying the

rest of your originals and sorts the copied papers in order. Because

the default value of theOutput option is Collated.

To cancel the current copy job, press Stop on the control panel. Or

you can delete the current and pending job using Job Status on the

control panel. Select the job you want to cancel and press Delete.

The Basic tab setting is only for each copy. That means that the

setting does not apply to the next copy job. After finishing the current

copy job, the machine automatically restores the default settings after

certain time. Or the machine resume to default setting when you press

the Clear All button on the control panel or when you press other

menu such as fax or else except the Job Status screen.

The default copy setting can be changed in Admin Setting. (See

"General settings" on page 74.)

Advertising
This manual is related to the following products: