Basic operation of the camcorder – Samsung SMX-F40RN-XAA User Manual
Page 40
8
1.
Open the LCD screen and press the Power (
) button to turn on the
camcorder.
• The Time Zone (“Home”) screen appears based on London, Lisbon
(Greenwich Mean Time).
• You can also set the “Time Zone: Home” from the Settings
(
) menu. page 82
2.
Select your geographical area with Control joystick (/), then press the
OK button.
• The Date/Time Set screen appears.
3.
Select the date and time information, and change the setting values by using
the Control joystick (///).
• To set the daylight saving, move the Control joystick (/) to select the
( ) icon, then move the Control joystick (/) to set Daylight Saving
on/off.
- Activating Daylight Saving forwards the time by 1 hour.
4.
Make sure the clock is correctly set, and then press the OK button.
• The year can be set up to 2037.
• Set “Date/Time Display” to “On.” page 85
• After setting, the date and time are automatically recorded on a special data area of the storage media.
SETTING THE TIME ZONE AND DATE/TIME FOR THE FIRST TIME
Set the date and time of your local area when turning on this camcorder for the fi rst time.
basic operation of the camcorder
Built-in rechargeable battery
• Your camcorder includes a built-in rechargeable battery that retains the date and time settings even after the power
is turned off.
• Once the battery is depleted, the previous date/time values are all reset to defaults, and you need to recharge the
built-in rechargeable battery. The date/time must be set again.
Charging the built-in rechargeable battery
• The built-in battery is always recharged while your camcorder is connected to the AC power or while the battery
pack is attached. If the camcorder is not in use for about 2 months without connecting to the AC power or attaching
the battery pack, the built-in battery fully discharges. If this occurs, charge the built-in battery by connecting to the
supplied AC adaptor for 24 hours.
Turning the date and time display on/off
• To switch the date and time display on or off, access the menu and change the Date/Time Display mode. page 85
Simple setting of the clock by time difference
• You can easily set the clock to the local time by setting a time difference when using your camcorder abroad.
Select "Time Zone" on the menu, then set the time difference. page 82
Date/Time Set
Home:
[GMT 00:00]
JAN/01/2010 12:00 AM
Home
London, Lisbon
Date/Time Set
Home
Visit : JAN/01/2010 12:00 AM
Back
Move
OK
00
12
2010
:
/
OFF
Day Year Hour Min
Month
AM
/
01
JAN
VIEW
W
T