Samsung HG55NB690QFXZA - Manual (Page 5)

5
English
Installing the LED TV Stand
The 32” and larger LED TVs have swivel stands. You can set these stands so that the TVs swivel 20 degrees left and right. 60
degrees left and right, or 90 degrees left and right. See page 7.
Components
When installing the stand, use the provided components and parts.
A 1 EA B 1 EA
C x8 (M4 X L12)
D x8 (M4 X L10)
y Stand
(Stand shape is depending on the model)
y Guide Stand y Screws
✎
NOTE
y Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
y Make sure that at least two people lift and move the TV.
y When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the
screws.
4
✎
Place a soft cloth over the table to protect the TV, and then
place the TV on the cloth screen-side down.
✎
Insert the Stand Guide into the slot of TV bottom side.
1 2
B
A
Rear
Front
(Incorrect assembly)
Side View 3 (Correct assembly)
Top View
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
C x4 (M4 X L12)
D x4 (M4 X L10)
or
D (M4 X L12, SECURITY) x4
C (M4 X L12) x4
[HG690_ZA]Install_Guide_00ENG.indd 5 2013-03-20 9:02:03