Samsung SEC-R470NBAUSC - Manual (Page 126)

123
3. Enter an emergency number (up to 32 digits in length).
4. Press to save the number that you entered.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press to place the call.
Resetting Your Phone
Reset Phone returns all setup options to their factory default.
1. At the Security sub-menu, select Reset Phone. You are
prompted to confirm that you want to restore your phone’s
default settings (except for the Contacts and Voice Dial).
• To restore default settings, select Yes.
• To retain your current settings and return to the Security sub-
menu, select No.
Erase All Entries
Erase All Entries erases all information from your Contacts list.
Note: To completely remove any personal information stored on your device,
see “Precautions for Transfer and Disposal” on page 152.
1. At the Security sub-menu, select Erase All Entries. You’re
prompted to enter the lock code again.
Note: The default lock code is the last four digits of your mobile phone
number.
The “Erase All Entries?” prompt appears in the display.
• To erase all Contacts list entries, press the Yes soft key.
• To keep the current Contacts list entries, press the No soft key.
Restriction
Restriction lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
1. At the Security sub-menu, select Restriction. The
following options appear in the display:
• Outgoing — Restrict/allow outgoing calls.
• Incoming — Restrict/allow incoming calls.
• Contacts — Restrict/allow all access to your Contacts list.
2. Highlight the desired Restriction and press . The
following options appear in the display:
• On — Restrict (block) selected calls.
• Off — No restriction on selected calls.
Note: Default setting for all Restrictions is Off.
3. Select the desired setting.