Samsung EV-NXF1ZZB1QUS - Manual (Page 134)

133
Wireless network >
Using the Baby Monitor
6 Start live video or sound monitoring.
‡ Watch live video from the camera on your smart phone. During
video monitoring, touch the Sound Monitoring Mode button on
the smart phone to stop the video stream. If the camera detects
noise, an alarm will notify you on the smart phone.
‡ During live video monitoring via the smart phone, video is not saved on
the camera.
‡ If the monitored location is dark, touch to turn on the AF-assist light.
‡ During sound monitoring, alarms will sound on the smart phone if the
camera detects noise for a short period at a volume that is higher than
the designated level.
‡ During live video monitoring, alarms will not sound on the smart phone
even if the camera detects noise.
7 Touch to exit the Samsung Home Monitor application.
Adjusting the noise level for alarm
activation
You can set the level of noise that will activate an alarm while using sound
monitoring. Press [D/I] to adjust the noise level.
Noise level for alarm
activation:
When the camera
detects noise that
exceeds the designated
level for a short period,
an alarm will sound.
Back Wi-Fi Setting
Sensor sensitivity
Do not use this feature for illegal purposes.