Samsung SC-D6550-XAC - Manual (Page 72)

ENGLISH
68 68
Adjusting the LCD Bright/Color during Playback
The Camcorder : Playback
✤ The Playback function works only in PLAY mode.
✤ You can monitor the playback picture on the LCD screen.
1. Set the Power switch to PLAY.
2. Insert the tape you wish to view. (see page 38)
3. Open the LCD screen.
■ Adjust the angle of the LCD screen and set the brightness or color if necessary.
4. Press the œœ (REW) button to rewind the tape to the starting point.
■ To stop rewinding, press the
■ (STOP) button.
■ The Camcorder stops automatically after rewinding is complete.
5. Press the √/» (PLAY/STILL) button to start playback.
■ You can view the picture you recorded on the LCD screen.
■ To stop playback, press the
■ (STOP) button.
✤ You can adjust the LCD Bright/Color during playback.
✤ The adjustment method is the same procedure as used in REC mode. (see page 34)
[ Notes ]
■ You can also view the picture on a TV screen, after connecting the Camcorder to a TV or VCR.
(see pages 70~71)
■ Various functions are available in PLAY mode. (see pages 72~73)
■ For searching and viewing still images recorded onto tape. (see page 67)
Playing Back a Tape You have recorded on the LCD Screen
2
5
1