Samsung SCH-L710RWBXAR - Manual (Page 17)

Getting Started 11
1. Insert the USB cable into the phone’s Charger/
Accessory jack.
2. Connect the USB cable to the charging head.
3. Plug the charging head into a standard AC power
outlet. The device turns on with the screen locked and
indicates both its charge state and percent of charge.
4. When charging is finished, first unplug the charger’s
power plug from the AC wall outlet, and then
disconnect the USB cable connector from the device.
Turning the Phone On
Ⅲ Press and hold the Power/Lock key (on the
upper right side of the phone) for three seconds. While
powering on, the phone connects with the network,
then displays the Locked screen and any active
Notification alerts.
Note: This illustration displays both the correct and
incorrect orientation for connecting the USB
cable. Failure to connect the USB cable correctly
may damage the accessory port and void the
phone’s warranty.
Incorrect
Warning! While the device is charging, if the touch
screen does not function due to an unstable
power supply, unplug the USB power
adapter from the power outlet or unplug the
USB cable from the device.