Network status, Bd-live internet connection, English – Samsung HT-D5300-ZA User Manual

Page 41: Wps(pbc), One foot connection

Advertising
background image

English

41

03

Setup

WPS(PBC)

The easiest way to set up the wireless network
connection is using the WPS(PBC) function or the
One Foot Connection function.

If your wireless router has a WPS(PBC) button,
follow these steps:

Press the ▲▼ buttons to select WPS(PBC).

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

> Move " Enter ' Return

One Foot

Connection

Wireless

(General)

Wired

Select a network connection type.

Connect to the Access Point easily by pressing the
WPS(PBC) button. Choose this if your Access Point
supports Push Button Confi guration(PBC).

WPS(PBC)

Press the ENTER button.

Press the WPS(PBC) button on your router
within two minutes. Your product displays
the Network Selection Screen, and
automatically acquires all the network
settings values it needs and connects to your
network. When it is done, it displays an OK
button. Press the ENTER button on your
remote.

One Foot Connection

You can set up the wireless connection
automatically if you have a Samsung Wireless
Router which supports One Foot Connection. To
connect using the One Foot Connection function,
follow these steps:

Press the ▲▼ buttons to select One Foot
Connection.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Settings

> Move " Enter ' Return

Wireless

(General)

Wired

Select a network connection type.

Connect to your wireless network automatically if your
Wireless Router supports One Foot Connection. Select
this connection type after placing the Wireless Router
within 10 inches(25cm) of Samsung Wireless LAN Adapter.

One Foot

Connection

WPS(PBC)

1.

2.

3.

1.

Press the ENTER button.

Place the Samsung Wireless Router within
25 cm (10 inches) of Samsung Wireless LAN
Adapter to connect.

Wait until the connection is automatically
established.

Network Status

Check whether a connection to the network and
the Internet have been established.

Settings

Display

Audio

Network

System

Language

Security

General

Support

Network Status

< Move " Enter ' Return

MAC Address

XX:XX:XX:XX:XX:XX

IP Address

0.0.0.0

Subnet Mask

0.0.0.0

Gateway 0.0.0.0
DNS Server

0.0.0.0

Internet is connected successfully.
If you have a problem using any Internet services, contact your Internet service
provider.

KT_WLAN

IP Settings

Retry

OK

Network Settings

BD-LIVE Internet Connection

Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.

Allow (All) : The Internet connection is allowed
for all BD-LIVE contents.

Allow (Valid Only) : The Internet connection is
allowed only for BD-LIVE contents containing a
valid certifi cate.

Prohibit : No Internet connection is allowed for
any BD-LIVE content.

NOTE

What is a valid certifi cate?
When the product uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certifi cate back to the product.

The Internet connection may be restricted
while you are using BD-LIVE contents.

2.

3.

4.

HT-D5300_XAA_1226.indd 41

HT-D5300_XAA_1226.indd 41

2011-12-26 11:39:57

2011-12-26 11:39:57

Advertising