Samsung DVD-VR320-AXAA - Manual (Page 18)

C
onnections
18 - English
There are several ways to connect your DVD Recorder
& VCR. Select the audio connection that best suits you
below.
• Method 1 : Connecting to your TV
• Method 2 : Connecting to a stereo amplifier (analog
audio out)
• Method 3 : Connecting to an AV amplifier with a digi-
tal input jack.
Step 4 : Connecting the
Audio Cable
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Method 1 : Connecting to your TV
If your TV has audio input jacks, use this connection.
Method 2 : Connecting to a stereo
amplifier with analog input jacks
If your stereo amplifier only has audio input jacks
(L and R), use the analog audio out jacks on the
DVD Recorder & VCR.
Method 3 : Connecting to an AV ampli-
fier with the digital input jack
If your AV amplifier has a Dolby Digital or DTS
decoder and a digital input jack, use this connection.
To enjoy Dolby Digital or DTS sound, you will need to
set up the audio settings. (See page 28)
00588A(00)-VR320-1/XAA-eng 3/3/05 7:25 PM Page 18