Samsung DVD-VR320-AXAA - Manual (Page 44)

44 - English
P
layback
Using the Markers
1 Press the MARKER button during playback.
2 Press the ENTER button when the desired scene
appears.
• The number 01 is displayed and the scene is
memorized.
3 Press the œ √ button to move to the next posi-
tion.
4 Press the ENTER button again when the desired
scene appears.
• The number 02 is displayed and the scene is
memorized.
• DVD-RAM or DVD-RW (VR Mode) discs have
the Marker function instead of the Bookmark
function. The Marker function allows you to mark
up to 99 scenes. Since the scenes may be dis-
played as many different pages, numbering is
necessary. If a disc in use is encoded with Disc
Protect, Markers cannot be set or deleted. Only
playback is available.
Playing back a Marker
1 Press the MARKER button during playback.
2 Press the œ √ buttons to select a marked scene.
3 Press the ENTER or √l l button to start playing
from the selected scene.
• If you press the NEXT SKIP (√√
l )button or the
PREVIOUS SKIP( l œœ)button in marker mode,
and the next or current marked point plays for
shorter than three seconds, playback starts from
the previous marked point.
Clearing a Marker
1 Press the MARKER button during playback.
2 Press the œ √ buttons to select a marked scene.
Press the CLEAR button to delete the selected
mark.
• When a marker is cleared while DVD-RAM/
DVD-RW(VR mode) is playing, marker numbers
will change. For example, if the 7th marker is
cleared after ten markers are registered, the
marker numbers after the eighth will automatical-
ly move ahead by one and the 8th marker
becomes the 7th.
RETURN CANCEL MOVE PLAY
Marker N:1 01
RETURN CANCEL MOVE PLAY
Marker N:2 01 02
RETURN SELECT
Marker N:0
RETURN CANCEL MOVE PLAY
Marker N:2 01 02
Marker 01 02 03 04 05 06 07 08 09 10 N:10
RETURN CANCEL MOVE
Marker
PLAY
01 02 03 04 05 06 07 08 09 N:9
(VR mode)
00588A(00)-VR320-2/XAA-eng 3/3/05 7:27 PM Page 44