Samsung DVD-VR320-AXAA - Manual (Page 49)

English - 49
P
layback
To play a standard VHS tape, just insert it into the VCR
deck and press the PLAY button. You can turn on the
Auto Play to enable the VCR deck to play automatically
when you insert a videotape that is missing the Record
Safety Tab.
1 Insert a standard VHS tape into the VCR deck.
• When a tape is inserted, power will turn on auto-
matically.
2 Press the √ II (PLAY/PAUSE) button on the
remote control or on the front panel of the unit.
The videotape will begin to play automatically if
the Record Safety Tab is removed and Auto Play
is turned on.
3 Press the (STOP) button on the remote control
or on the front panel of the unit.
The Tracking adjustment removes the white lines that
sometimes appear during playback because of slight
differences in recording decks. The CH/TRK ( /
)
button will automatically align the recorded tracks with
the playback heads to solve this problem. You may also
set tracking manually.
1 Adjust Tracking Manually
During playback, press the CH/TRK ( / )
buttons to remove white lines from the picture.
While a videotape is playing, you can enjoy a variety of
special playback features, including Still, Frame
Advance, Skip, Slow motion, and more.
Pause
In Play mode, press √ II (PLAY/PAUSE)button to still
a single frame.
Frame Advance
In the pause mode, press F.ADV/SKIP button to
advance to the next frame.
Fps/Review
In Play mode, press Forward (√√)button or Rewind
(œœ)button to Cue/review at two speeds:
• Picture Search - Press and release to advance the
tape forward or backward at 5 times normal speed.
• Jet Search - Press and hold to advance the tape
forward or backward at 7 times normal speed.
Skip
In Play mode, press F.ADV/SKIP button to cue
ahead exactly 30 seconds. Press F.ADV/SKIP button
repeatedly up to 4 times to cue ahead 2 minutes.
Slow motion
In pause mode, press √√ button for slow motion.
Press the √√ button repeatedly to vary slow motion
speed from 1/5 to 1/30 of normal playback. Press
the PLAY button twice to resume normal viewing.
The DVD Recorder & VCR allows you to playback high
quality S-VHS tapes.
1 Insert an S-VHS tape into the VCR deck.
2 Press √ II (PLAY/PAUSE)button on the remote
control or on the front panel to begin playback of
the S-VHS tape.
Playing the VCR
Tracking
Special VCR Playback
Features
S-VHS Playback
00588A(00)-VR320-2/XAA-eng 3/3/05 7:27 PM Page 49