Troubleshooting (dvd-video/dvd-ram/dvd-rw/dvd-r), Reference, English - 83 – Samsung DVD-VR320-AXAA User Manual

Page 83

Advertising
background image

English - 83

R

eference

If your product malfunctions, go through the check points below before contacting a Samsung authorized ser-
vice center,

Problem Explanation/Solution

• Check whether the power cord is securely plugged into the power outlet.
• Did you press the power button of your DVD Recorder & VCR.

• The DVD Recorder & VCR requires some time to initialize after it is turned on.

• Check whether the power cord is securely plugged into the power outlet.
• Did you set the DVD Recorder & VCR channel settings correctly?
• Check the free space on your DVD-RAM/DVD-RW/DVD-R disc.
• Check the antenna cable is connected.

• Check the recording time, end time and current time settings again.
• Recording will be cancelled if the power is interrupted due to a power

failure or other reason during recording.

• Check whether the disc is formatted. This product can record on

formatted discs only. (See page 78.)

• Check whether your DVD-RAM/DVD-RW/DVD-R disc has a sufficient free space.

• Recording is available on DVD-RAM/DVD-RW/DVD-R discs only.
• If a program is copy protected, you cannot record it.

• Press the √ and √√I buttons of your DVD Recorder & VCR at the same time when the

power is on, and then press the POWER OFF/ON button. All settings including password
will revert to factory settings. Do not use it if not absolutely required.

(Note that this function is available only when there is no disc inserted.)

• Check whether the disc is inserted correctly with the label facing up.
• Check the regional code of your DVD disc.
• This DVD Recorder & VCR cannot playback some types of disc. (See page 5.)

• Are you watching a program in slow or skip mode?

If you are playing a program at a speed other than normal speed, sound

is not output.

• Check the connections and initial settings.
• Check whether the disc is damaged.

Clean up the disc, if necessary.

• Check whether the disc is inserted correctly with the label facing up.

The input is displayed
for a while when the
power turns on.

Cannot record TV
programs.

Timer recording does
not work properly.

Cannot record.

I pressed the REC
button but there is
no response.

I forget the password
for parental lock.

Cannot playback the
disc.

No sound.

No power.

Troubleshooting
(DVD-VIDEO/DVD-RAM/DVD-RW/DVD-R)

00588A(00)-VR320-3/XAA-eng 3/3/05 7:29 PM Page 83

Advertising
This manual is related to the following products: