Samsung KN55S9CAFXZA User Manual

Quick start guide, Welcome to your new smart tv

Advertising
background image

BN68-05357A-03

QUICK START

GUIDE

Welcome to your new Smart TV!

The following instructions cover assembling, connecting, and setting up your new TV. Make

sure you have the accessories listed below.

Included in this box

Remote Control

One connect and Cables

Smart Touch Control

Power cord

IR extender

Batteries (AAA x 4)

RCA adapter x 2

Component adapter

One connect

Remote Control

One connect cable

Also included: User manual, 3D active glasses

Step

1

Attach the TV to
the Stand

Step

2

Connect video
devices

Step

3

Using the Smart
Touch Control

Step

4

Power on and
start the initial
setup

Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.

S9C

Step 1

Attach the TV to the Stand

1A

Open the package, and remove the cushioning.

Stand cover

Screws

Stand

M4 x L20 4 pieces

M4 x L10 2 pieces

x 4

x 2

1B

Pull the stand out of the top Styrofoam

cushioning, and make the stand face your body,

as shown in the illustration. Insert a finger

into the groove in the middle and pull it up to

separate the cover from the stand.

REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV

(such as the box).

1C

Remove the TV from the box. Then, remove

the top and bottom pieces of Styrofoam from

the TV, but keep the screen-protection piece

on. Place the TV down on the the box with the

screen facing down.

1D

Hook

Tilt the stand to put its hook into the groove on

the back of the TV, and push it, giving it a slight

turn until it is firmly in place.

1E

M4 x L10

Secure the bottom of the stand to the TV using

two screws.

1F

M4 x L20

Secure the stand to the TV using four screws as

shown in the diagram.

1G

To replace the stand cover, fix its exterior and

then the interior into the stand. Press both

sides firmly to make sure that it is completely

assembled.

1H

Remove the port cover, and connect the power

cord to the One Connect.

1I

Replace the port cover.

1J

Stand the TV up, and remove the Styrofoam

bumper and the 4 protective pads from the

screen.

[S9C-QSG]BN68-05357A-03ENG.indb 2

2013-10-30 �� 5:19:12

Advertising