Samsung DVD-R120-XAA - Manual (Page 21)

English - 21
Case 2 : Connecting to an
S-Video output jack
1. Connect an S-Video cable (not included) between the
S-VIDEO OUTjack on DVD Recorder and S-VIDEO
INPUTjack on your TV (or AV amplifier).
2. Connect audio cables (white and red) between the AV
AUDIO OUTjacks on DVD Recorder and AUDIO IN
jacks on TV (or AV amplifier).
● You will enjoy high quality images.
Case 3 : Component Video
output jacks
1. Connect Component video cables(not supplied)
between the COMPONENTOUT(Y,P
B
,P
R
) jacks on
DVD Recorder and COMPONENTIN(Y,P
B
,P
R
) jacks
on your TV.
2. Connect audio cables (white and red) between the
AUDIO OUTjacks on the DVD Recorder and AUDIO
IN jacks on TV (or AV amplifier).
(See pages 22 to 23).
3. After connecting, refer to the page 36 to 37.
● You will enjoy high quality and accurate color
reproduction images.
COMPONENT
Pr
Pb
Y
2
1
green
blue
red
green blue red
■ Make sure that the color coded
connections match. The Y, P
B
, P
R
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
■ Progressive setting is only available when
the Video Out is set to Component.
(See page 36)
NOTE
C
onnecting & Setting UP
1-00687A-R120-UK_19~42 3/10/05 5:19 PM Page 21