Samsung DVD-R120-XAA - Manual (Page 48)

48 - English
• Source : The video input source (“AV1”, “AV2”,
“AV3”), or the broadcasting
channel you want to make a timer
recording from.
• Date : Timer Recording allows setting the
recording time within one month period. Set the
recording day. (day/month)
01/JAN(SAT) Every Day
02/JAN(SUN) MON-SAT
03/JAN(MON) MON-FRI
30/JAN(SUN) Every SAT
31/JAN(MON) Every SUN
• Start/End Time : Start and end time of the timer
recording.
• Mode (Recording Mode) :
- FR (Flexible Recording) : Select when you want to
set video quality automatically.
In FR mode, the most suitable record mode is
adjusted automatically, according to remaining
time on the disc and length of the timer recording.
This function is selected only one mode in XP, SP,
LP and EP modes.
- XP (high quality) : Select when video quality is
important. (Approx. 1 hour)
- SP (standard quality) : Select to record in standard
quality. (Approx. 2 hours)
- LP (low quality) : Select when a long recording
time is required.(Approx. 4 hours)
- EP (extended) : Select when a longer recording
time is required. (Approx.6 hours or 8 hours)
• PDC : PDC(Programme Delivery Control)
function.
- If you set this function on, you can control the
starting and ending time of recording by special
signal included in the broadcasting signal.
If a TV programme is shortened or starts earlier or
later than scheduled, this function synchronizes
the starting and ending time of recording with the
actual broadcasting time automatically.
- Set up the start-time EXACTLY according to the
published TV schedule. Otherwise the timer
recording will not take place.
- Do not select PDC unless you are sure the
programme you wish to record is broadcast with
PDC.
1. Check the antenna cable is connected.
2. Check the remaining time of the disc.
3. Check the date and time are correct.
Make sure the Clock (Setup-Clock Set) must be set
before you proceed with a timer recording.
(See page 27)
1 With the unit in Stop mode, press the
TIMER button.
Using the MENU button.
● With the unit in Stop mode, press the MENU
button.
● Press the …† buttons to select Programme, then
press the OK or √ button.
● Press the …† buttons to select Timer Record.
2 Press the OK or √ button.
• The Timer Recording screen is displayed.
3 Set timer recording option.
• Fill the input items using the arrow buttons and
number buttons.
œ √ : Moves to the previous/next item,
…†, 0~9 : Sets a value.
Making a Timer Recording
Before you start
RETURN OK MOVE EXIT
Scheduled Record List DVD-RAM(VR)
No. Source Date Start End Mode PDC Edit
01 -- -- -- - -- --:-- --:-- -- -- √ √
Recordable Time 02:12 SP
No. 01
Source Date Start End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP Off
Recordable Time 02:12 SP
■ When you are recording at EP mode on a
DVD-RW(V)/R disc, it may not record the
full 6 or 8 hours because the unit uses the
VBR(Variable Bit Rate) ENCODING
system. For example, if you record a
program with a lot of action, it uses a
higher bit rate which in turn consumes
more disc memory.
NOTE
RETURN OK MOVE EXIT
Timer Record DVD-RAM(VR)
Video Plus+ √ √
Timer Record √ √
Video Plus+ Extended : Off √ √
Disc Navigation
Playlist
Disc manager
Programme
Setup
R
ecording
1-00687A-R120-UK_43~52 3/10/05 5:23 PM Page 48