Samsung DVD-R120-XAA - Manual (Page 51)

English - 51
3 Press the OK button.
● The information concerning the programme is
displayed.
● When using the Video Plus+ function for the
first time with stored stations, the programme
number flashes. This one time, you must enter
the PR number manually by pressing the
…† buttons or number buttons.
4 If the programme and times are correct,
press the OK button.
5 Turn the power off by pressing the
STANDBY/ON button to activate the timer
recoding setting.
6 Refer to pages 48~50 if you want to:
● Check whether the timer Recording has set
correctly or not.
● Cancel a preset recording.
Before presetting your DVD Recorder:
• Switch on both the television and your DVD Recorder.
• Check that the date and time are correct.
Up to twelve programmes can be preset.
1 With the unit in Stop mode, press the
TIMER button. Press the …† buttons to
select Video Plus+, then press the OK or
√ button.
● A message is displayed to allow you to enter the
Video Plus+ code.
Using the MENU button.
● With the unit in Stop mode, press the MENU
button.
● Press the …† buttons to select Programme, then
press the OK or √ button twice.
2 Press the number buttons to enter the
code of the programme that you want to
record in your television magazine.
● If you want to correct the Video Plus+ code that
you are entering:
● Press the œ button until the digit to be corrected
is cleared.
● Enter the correct digit.
Using the Video Plus+
Feature
■ The numbers next to each TV programme
listing in the magazines or newspapers
are Video Plus+ code numbers, which
allow you to programme your DVD
Recorder instantly with the remote
control. Enter the Video Plus+ code for
the programme you wish to record.
■ Video Plus+ is a trademark of Gemstar
Development Corporation. The Video
Plus+ system is manufactured under
licence from Gemstar Development
Corporation.
NOTE
RETURN OK EXIT
DVD-RAM(VR)
Disc Navigation
Playlist
Disc manager
Programme
Setup
(Press [OK] button : Make Code.)
RETURN OK MOVE EXIT
Scheduled Record List DVD-RAM(VR)
No. Source Date Start End Mode PDC Edit
01 PR 01 01 JAN 12 : 00 14 : 00 SP Off √ √
02 -- -- -- - -- --:-- --:-- -- -- √ √
Recordable Time 02:12 SP
RETURN OK MOVE EXIT
Scheduled Record List DVD-RAM(VR)
No. Source Date Start End Mode PDC Edit
01 -- -- -- - -- --:-- --:-- -- -- √ √
Recordable Time 02:12 SP
No. 01
Source Date Start End Mode PDC
PR 01 01/JAN(SAT) 12 : 00 14 : 00 SP Off
Recordable Time 02:12 SP
R
ecording
1-00687A-R120-UK_43~52 3/10/05 5:23 PM Page 51