Samsung HCP4252WX-XAC - Manual (Page 20)

Turning the TV On and Off
20
O P E R AT I O N
C h a p t e r T h r e e
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
1
Press the POWER button on the
remote control.
The “Start Plug & Play” is
displayed.
Press the ENTER button to start.
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and
subsequently as below.
2
The “Language” menu is
displayed.
Press the … or † button to
select the appropriate language,
then press the ENTER button.
4
The “Air/CATV” menu is
displayed.
Press the … or † button to
select the video signal source,
then press the ENTER button.
3
The “Check antenna input” is
displayed.
Make sure that the antenna is
connected to the TV, then press
the ENTER button.
œ Plug & Play feature doesn’t
work when the V-Chip is
activated or when in the A/V
mode.
Enter Exit
Plug & Play
OK
Start Plug & Play
Move Enter Skip
Plug & Play
Language
English
Français
Español
Enter Skip
Plug & Play
OK
Check antenna input.
Move Enter Skip
Plug & Play
Air/CATV
Air
STD
HRC
IRC
BP68-00289A-00Eng 3/30/04 9:28 AM Page 20