Samsung SCX-4521F-XAA - Manual (Page 57)

Maintenance
8.3
4
Remove the manual tray by pulling it out.
5
With a dry lint-free cloth, wipe away any dust and spilled
toner from the toner cartridge area and the toner cartridge
cavity.
C AUTION : Do not touch the black transfer roller inside the
machine.
6
Locate the long strip of glass (LSU) inside the top of the
cartridge compartment, and gently swab the glass to see if
dirt turns the white cotton black.
7
Reinsert the manual tray, toner cartridge and close the
door.
8
Plug in the power cord and turn the machine on.
Cleaning the Scan Unit
Keeping the scan unit clean helps ensure the best possible
copies. We suggest that you clean the scan unit at the start of
each day and during the day, as needed.
1
Slightly dampen a soft lint-free cloth or paper towel with
water.
2
Open the document cover.
3
Wipe the surface of the document glass and ADF glass
until it is clean and dry.
4
Wipe the underside of the white document cover and white
bar until it is clean and dry.
5
Close the document cover.
Maintaining the Toner Cartridge
Toner cartridge storage
To get the most from the toner cartridge, keep the following
guidelines in mind:
• Do not remove the toner cartridge from its package until
ready for use.
• Do not refill the toner cartridge. The machine warranty
does not cover damage caused by using a refilled
cartridge.
• Store toner cartridges in the same environment as your
machine.
• To prevent damage to the toner cartridge, do not expose
it to light for more than a few minutes.
Saving toner
To save toner, press the Toner Save button on the control
panel; see ?$paratext>? on page 2.11. The button backlight
turns on. Using this feature extends the life of the toner
cartridge and reduces your cost per page, but it also reduces
print quality.
Document
cover
Document
glass
White bar
ADF glass