Samsung SMX-F54BN-XAA - Manual (Page 70)

62 6 62 6
TIME LAPSE REC
Using the time lapse feature, your camcorder can be programmed
to automatically record a number of frames over a period of time,
with a certain time interval between each frame. For instance, a
camcorder on a tripod (not supplied) in time lapse mode could be
set up to shoot frames of a flower opening or a bird building a nest.
The results is a time lapse video.
Select the Record ( / ) mode by pressing the MODE button.
page 24
1. Press the MENU button 
Control (Left/Right) button 
“Time Lapse REC.”
2. Press the Control (Up/Down)
button to select "On," then press
the OK button.
The recording interval and total
time for recording items are
displayed. (“Sec”: seconds,
“Hr”: hours)
3. Set a desired recording interval
(“Sec”) with the Control (Up/
Down) button.
•
4. Move to the next setting, "Hr," by pressing the Control (Left/
Right) button, and then set a desired total recording time in the
same way.
5. Press the OK button to finish the setting, and then press the
MENU button to exit the menu.
6. After setting the Time Lapse REC mode, press the Recording
start/stop button.
The Time Lapse REC starts.
Depending on the selected total recording time and recording
interval, image frames are captured by each scene.
•
•
Recording options
Submenu items
Items Use
On-screen
display
Off To disable the function. -
On
Interval (“Sec”): To set the time interval
between image captures. Images are
automatically shot a frame at a time at the
specified interval and stored in the storage
media: 1  3  5  10  15  30 (Seconds)
REC Limit (“Hr”): To set the total time from start
to finish of recording: 24  48  72 
∞ (Hours)
•
•
Time Lapse REC
Off
On
Exit
STBY 0:00:00 [475Min]
: 1Sec
24Hr
SCENE
Time Lapse REC
Off
On
Exit Move Set
STBY 0:00:00 [475Min]
Sec Hr 1
= Hr
SCENE
0:00:00 [475Min]
1 Sec / Hr
Time Lapse Recording