Samsung SCH-I400ZKOVZW - Manual (Page 100)

Connections 100
Pairing with a Bluetooth Device
Search for a Bluetooth device and pair with it, to exchange
information between your phone and the device.
Tip: After pairing, your phone and the target device will recognize each other
and exchange information without having to enter a passcode or PIN.
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks.
2. Touch Bluetooth to turn on Bluetooth.
3. Activate the target device’s discoverable mode.
4. Touch Bluetooth settings ➔ Scan devices.
5. From the list of scanned devices, touch the target device,
then follow the prompts to complete the pairing:
• If the target device requires a PIN, enter a PIN for the target device
and touch OK. When prompted, enter the PIN on the target device.
• If the device allows automatic or smart pairing, your phone will
attempt to pair with the phone automatically. Follow the prompts on
your phone and the target device to complete the pairing.
Note: When paired, the Bluetooth Paired icon displays in the
Annunciator Line.
VPN
You can use your phone’s VPN (Virtual Private Network) feature to
connect to VPNs.
Configuring VPN Settings
Configure your phone’s VPN settings. For more information, see
“VPN settings” on page 127.
Adding a VPN
1. From the Home screen, touch Menu ➔ Settings ➔
Wireless & networks ➔ VPN settings.
2. Touch Add VPN to set up a connection to a VPN, using the
following settings:
• Add PPTP VPN: Set up a connection to a VPN with Point-to-Point
tunneling protocol.
• Add L2TP VPN: Set up a connection to a VPN with Layer 2
tunneling protocol.
• Add L2TP/IPSec PSK VPN: Set up a connection to a VPN with pre-
shared key-based Layer 2/IPsec tunneling protocol.
• Add L2TP/IPSec CRT VPN: Set up a connection to a VPN with
Certificate-based Layer 2/IPsec tunneling protocol.