Samsung SECR410ZRAMTR - Manual (Page 101)

Multimedia 98
Camera
Memory Counter — Indicates the maximum number of
photos you can take at the current Resolution and Quality
settings.
Quality — Indicates the current photo Quality setting (Fine
shown).
White Balance — Indicates the current photo White Balance
setting (Auto shown).
Self Timer — Delays the camera shutter by either 2, 5, or 10
seconds after you press the key.
Multi Shot — Automatically or manually
takes multiple pictures in sequence after you
press the
key.
Camera Shortcuts
You can use the Navigation Keys to quickly access both the Brightness and Zoom
capabilities of the built in camera. When you exit the camera mode, all camera
settings return to default values.
Brightness
1. In camera mode, change the brightness of your pictures using the Up and
Down navigation keys. Options are +4 – -4.
2. Press the key to take the picture.
Zoom in on a Subject
Your camera has digital zoom capabilities of up to x2 with Resolution set to
320x240, and up to x3 with Resolution set to 160x120.
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal result of digital enhancement.
Note: The Zoom setting is affected by the Resolution setting (camera mode). With Resolution set to
640x480, no zoom is available. With Resolution set to 320x240 and lower, Zoom settings 0 – 2 are
available. With Resolution set to 160x120 and lower, Zoom settings 0 – 3 are available.
1. In camera mode, press the Left and Right navigation keys to zoom in and
out on your subject.
2. Press the key to take the picture.
OK
OK
OK
OK