Enter/exit silent mode, Vibrate mode, Adjust the ringer – Samsung SECR410ZRAMTR User Manual
Page 23
Understanding Your Phone
20
Your Phone’s Modes
To disable Speakerphone Mode, press and hold
until “Speakerphone Off”
appears in the display.
Note: Your phone automatically enters Speakerphone Mode when you dial a call using the QWERTY keypad
and the called phone begins ringing.
Enter/Exit Silent Mode
Silence the tones your keypad makes when you press a key.
•
To enter Silent Mode:
ᮣ
In standby mode, press and hold
. “Entering Silent Mode” briefly
appears in the display and your phone returns to standby mode.
•
To exit Silent Mode:
ᮣ
While in Silent mode and standby mode, press and hold
. “Exit
Silent Mode” briefly appears in the display and your phone returns to
standby mode.
Vibrate Mode
ᮣ
In standby mode, repeatedly press the volume key (
) down until Vibrate
appears in the display.
The volume key is on the upper right side of phone.
Adjust the Ringer
1.
In standby mode, press the volume key (
) on the right side of the phone
up or down. Options are:
2.
When you are satisfied with the setting, press the
key. Your phone
returns to standby mode.
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the MENU (left) soft key (
),
then pressing the
,
,
, and
keys. Use the Volume key on the right
side of your phone to adjust the ringer volume setting.
Note: The Vibrate icon (
) appears in the display when the phone is in Vibrate mode. The Vibrate/
Ring icon (
) appears in the display when the phone is in Vibrate/High mode.
• Ringer Off
• Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High
OK