Reset digits, Sound – Samsung SECR410ZRAMTR User Manual
Page 96
93
5.
After confirming that the recording sounds “ok”, continue the recording
process with the next set of digits.
6.
After 10 sets of digits, the phone asks whether you want to do more
adaptation. Answer “Yes.”
7.
Repeat steps 4 and 5 for another 10 sets of digits. After the second group
of 10 sets of digits, “Adaptation complete” plays through the speaker and
you are returned to the Digit Dialing menu.
Reset Digits
To reset digit dialing to factory default settings, do the following:
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(forfor
Voice Settings), and
for Digit
Dialing. The following options appear in the display:
• Adapt Digits
• Reset Digits
2.
Use the Up/Down navigation keys to highlight Reset Digits, then press the
key. The phone prompts you to confirm digit rest.
3.
Press the OK (left) soft key (
) to reset your digit adaptation, or press
the Back (right) soft key (
) to cancel.
Sound
Sound lets you specify what (if any) text prompts you want your phone to read to you
through the earpiece.
1.
In standby mode, press the MENU (left) soft key (
), then press
(for Voice SVC),
(for
Voice Settings), and
for
Sound. The following options appear in the display:
• Prompts — On/Off — Enables or disables audio prompts.
• Digits — On/Off — Enables or disables digit playback.
• Names — On/Off — Enables or disables name playback.
• Name Settings — Lets you adjust the Speed (Faster or Slower) and Volume
(Louder or Softer) of your phone’s audio name playback.
2.
Use the Up and Down navigation keys to highlight the desired option, then
press the
key.
3.
Use the Up and Down navigation keys to highlight the desired setting.
4.
Press the
key or the OK (left) soft key (
) to accept the new
setting. Press the
key to discard the new setting and return to the
Sound menu.
OK
OK
OK