Samsung SCH-R880MBAUSC - Manual (Page 43)

Contacts List 39
Voice Method
Use the Voice Control Look up command to view Contact
information for any named contact stored in your Contacts list by
saying the Contact’s name.
Note: The Look up command shows the requested Contact information in the
display but does not dial any phone numbers for the Contact.
To call the Contact, touch one of the Contact’s numbers or start a new
Voice Command session and us the Call command.
To look up information for a specific Contact:
1. Touch ➔ ➔ Voice Control.
“Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Look up”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your Contacts list.
If Voice Control does not recognize the name you said, a
choice list of up to three names appears in the display, and
Voice Control prompts you with “Did you say look up”
followed by the first name on the list.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or touch the correct name from the list.
• To exit VoiceSignal without dialing, touch .
5. The Contact information for the name you selected
appears in the display.
Editing an Existing Contact
Once stored in the Contacts list, an entry can be changed quite
easily.
1. In the Contacts list, search for and touch the desired
Contact. (For more information, refer to “Searching for a
Contact” on page 38.) The select Contact’s information
appears in the display.
2. Touch ➔ Edit contact. The Edit contact screen
appears in the display.
3. Touch each number or other field in turn whose contents
you wish to enter or change.
4. When you’re finished editing the Contact, touch to
save your changes.