Samsung SCH-R211ZKBCRI - Manual (Page 17)

Understanding Your Phone 14
To exit Silent Mode:
ᮣ While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
Vibrate Mode
While in Vibrate Mode, your phone does not ring to indicate
incoming calls or alarms, it vibrates instead.
To enter Vibrate Mode:
ᮣ In standby mode, repeatedly press the Volume key
( ) down until “Vibrate” appears in the display.
Note: The Volume key is on the left side of phone.
Adjust the Ringer
In standby mode, press up or down.
1. In standby mode, press up or down to set the call
ringer volume as desired.
Options are:
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
You can also enter the Volume > Voice Calls sub-menu by
pressing MENU
➔ Tools & Settings ➔ Settings ➔ Sound Settings
➔ Volume ➔ Voice Calls. Use the Volume key ( ) on the
left side of your phone to adjust the ringer volume setting.
The Vibrate icon ( ) appears in the display when the phone is
in Vibrate mode. The Vibrate/Ring icon ( ) appears in the
display when the phone is in Vibrate/High mode.
Keypad Lock
You can avoid accidental dialing and/or phone feature activation
by locking the keypad when not using your phone.
To Lock the Keypad:
ᮣ In standby mode, press and hold until Keypad is
locked! pops up in the display.
• Ringer Off • Medium
• Vibrate • Medium/High
• Low • High
• Low/Medium • Vibrate/High