Samsung SCH-R211ZKBCRI - Manual (Page 37)

Understanding Your Contacts 34
3. Use the Up/Down navigation keys to highlight a number
stored in this contact entry.
4. Press to backspace and delete numbers.
5. Press and hold to clear all numbers in the highlighted
field.
Note: You can also add numbers (such as a Pager number or a Fax number)
to the entry, assign it to a Group, and add other information.
6. When you’re finished editing the entry, press . Your
changes are saved and a confirmation message appears in
the display.
Adding Pauses to Contacts Numbers
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
• 2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
• Wait — A hard pause stops the calling sequence until further input
from you.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
Store Pauses in a New Contacts Entry
1. In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
2. Press the Options soft key. The following menu options
appear in the display:
• Search — Lets you find Contacts list entries by their phone
numbers.
• 2-Sec Pause — Adds a two-second pause.
• Wait — Adds a hard pause (awaits input from you).
• Send Text Msg — Lets you send a text message to the entered
number.
3. Select the pause option of your choice to enter the
highlighted pause into your number sequence.
4. When you’re finished entering the number and pauses,
press the Save function key to store the number in your
Contacts.