Samsung SCH-R211ZKBCRI - Manual (Page 64)

61
Dialing Font Size
Dialing Font Size lets you select the size of displayed dialed
numbers.
1. At the Settings menu, select Display Settings ➔ Dialing
font size.
The following options appear in the display:
• Normal
• Large
2. Highlight the desired font size, then press to save the
setting.
Banner
Create your own personalized text greeting that appears in the
display while your phone is in standby mode.
1. At the Settings menu, select Display Settings ➔ Banner.
The Banner text entry screen appears in the display.
Note: If necessary, press and hold to erase an existing banner.
2. Enter a word or short phrase (up to 12 characters) to
appear in your phone’s display while in standby mode. (For
more information, refer to “Entering Text” on page 26.)
3. Press to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on
or off or to remain on for a specified period of time.
Note: Prolonged backlight use drains your battery faster.
1. At the Settings menu, select Display Settings ➔
Backlight. The following sub-menus appear in the display:
• Main Display — Sets the amount of time the main display
backlight remains on with the phone idle. Optional settings are 7,
15, and 30 Seconds and Always On (this setting uses much more
power than the timed settings) and Always Off.
• Keypad — Sets the amount of time the main display backlight
remains on with the phone idle. Optional settings are 7, 15, and 30
Seconds and Always On (this setting uses much more power than
the timed settings) and Always Off.
• Brightness — Use the Navigation key to select between any of 5
optional settings.
• Charging — When set to On, the backlight stays on while your
phone is on and you are charging the battery.
2. Highlight an option.
3. Press to enter the highlighted option’s sub-menu and
to save changed settings as desired.