Samsung LS19DOCSSK-XBM - Manual (Page 35)

Air/Cable The channel system can be set in several different ways.
STD, HRC, IRC, AFN and Air identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system that
exists in your particular area.
Air
STD
HRC
IRC
AFN
Auto
Program The TV automatically cycles through all of the available channels and stores
them in memory. This takes about one to two minutes.
In rare cases, "Auto program" may miss a few channels due to weak signals
and the channels may not be added to the channel memory.
Add/Delete Selecting Add registers the channel and selecting Delete deregisters the
registered channel.
Fine Tune Due to weak signals or an incorrect antenna configuration, some of the
channels may not be tuned correctly.
Setup
Available Source List : PC / DVI : TV : AV : S-Video : Component
OSD Description Play/Stop
Area
Configuration When you turn the power on of the product for the first time since it released
from a factory, menu to select location will appear.
Choose the region and country where you use the monitor.
This is because broadcasting type varies according to region and country.
You can select broadcasting type in OSD menu as well by selecting MENU-
Setup-Area Configuration.
This product can be used worldwide if area configuration is set
up regardless of broadcasting type.
If country is not selected properly, the product may not locate