Samsung HLT5676SX-XAA - Manual (Page 17)

English - 17
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1 Press the POWER button on the remote control.
The message Menu language, Shop Mode, Channels and Time will be set. is
automatically displayed.
Press the ENTER button, then the message Select the language of the OSD. is
displayed.
2 Press the ◄ or ► button to select a language, then press the ENTER button.
3 Press the ◄ or ► button to select Shop or Home, then press the ENTER button.
➢ The default selection is Home.
➢ We recommend setting the TV to Home mode for the best picture in your home
environment.
➢ Shop mode is only intended for use in retail environments.
➢ If the unit is accidentally set to Shop mode and you want to return to Dynamic (Home)
mode, press the Volume button and then hold down the MENU button for five seconds
on the TV panel.
4 Press the ◄ or ► button to memorize the channels of the selected connection, then press
the ENTER button.
➢ If the antenna is connected to ANT 1 IN (CABLE), select Cable and if it is connected
to ANT 2 IN (AIR), select Air.
➢ If both ANT 1 IN (CABLE) and ANT 2 IN (AIR) are connected, select the Air+Cable.
➢ In Cable mode, you can select the correct analog signal source among STD, HRC,
and IRC by pressing the ◄ or ► button, then press the ENTER button. If you have
Digital cable, select the signal source for both Analog and Digital.
Contact your local cable company to identify the type of cable system that exists in
your particular area.
5 The TV will begin memorizing all of the available channels.
After all the available channels are stored, the Auto program menu reappears.
Press the ENTER button when channel memorization is complete.
The message Set the Clock Mode. is displayed.
➢ To stop the search before it has finished, press the ENTER button with stop selected.
6 Press the ◄ or ► button to select Manual for setting the current time manually, then press
the ENTER button. The message Enter the current date and time. is displayed.
➢ If you select Auto, Set to daylight saving time. is displayed, then go to step 9.
(If you want to set the time automatically, skip to step 9.)
7 Press the ◄ or ► button to move to Month, Day, Year, Hour, or Min.
Set the date and time you want by pressing the ▲ or ▼ button, then press the ENTER
button.
➢ You can set the month, day, year, hour, and minute directly by pressing the number
buttons on the remote control.
8 The message Enjoy your watching. is displayed.
When you have finished, press the ENTER button.
➢ Even if the ENTER button is not pressed, the message will automatically disappear
after several seconds.
Continued...
Plug & Play
Select the antennas to memorize
Air Cable Air+Cable
Enter Skip
Plug & Play
Auto Program in Progress.
Cable 3
10%
Stop
Enter Skip
Plug & Play
Selects the cable system.
Analog
Digital STD HRC IRC
STD HRC IRC
Enter Skip
Plug & Play
Set the Clock Mode.
Auto Manual
Enter Skip
Plug & Play
Enjoy your watching.
OK
Plug & Play
Select the language of the OSD.
English Español Français
Enter Skip
Plug & Play
Select Home Mode when installing this TV at
home.
Shop Home
Enter Skip
Plug & Play
Enter the current date and time.
Enter Skip
Month / Day / Year Hour / Min
-- / -- / ---- -- : -- -- ▲
▼
Adjust
Plug & Play
Menu language, Shop Mode, Channels and Time
will be set.
Start
Enter Exit
BP68-00630A-Eng_1.indd 17 2007-03-30 ｿﾀﾈﾄ 5:13:48