Samsung HLT5676SX-XAA - Manual (Page 64)

English - 64
➢ ● If you enter the WISELINK mode with no USB device connected. “There is no device connected” message will appear. In this
case, insert the USB device, exit the screen by pressing the WISELINK button on the remote control and enter the WISELINK
screen again.
● Photo and audio files must be named in English, French, or Spanish.
If not, the files can not be played. Change the file names to English, French, or Spanish if necessary.
● Folder or file names can not exceed 128 characters. If exceeded, they won’t function.
● The file system only supports the FAT16/32.
● Certain types of USB Digital camera and audio devices may not be compatible with this TV.
● WISELINK only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card Readers.
● Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
Using the Remote Control Button in WISELINK Menu
Button Operations
Move the cursor and select an item
Select the currently selected item.
Play or pause the Slide Show or MP3 file.
Return to the previous menu.
Stop the current function and return to the previous high-level menu.
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
Page Up or Down (file list item)
WISELINK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class (MSC)
device.
1 Press the power button on the
remote control or side panel.
2 Connect a USB device containing
JPEG and/or MP3 files to the
WISELINK jack (USB jack) on the
side of the TV.
TV Side Panel
BP68-00630A-Eng_3.indd 64 2007-03-30 ｿﾀﾈﾄ 5:22:43