ADC LSZH - Manual

Fiber Optic Cable
Armored Outside Plant Cables
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Sp
ec
S
h
ee
t
ADC’s line of armored outdoor loose tube cables with polyethylene jackets are designed to meet
all the rigors of the outside plant environment. The cable core is protected from moisture with
a water swellable tape, eliminating the need for a filling compound. Terminations require less
effort making the installation easier.
Features:
Dry cable core
Available in singlemode, 50 µm and
62.5 µm multimode versions
Gel-filled buffer tubes
All-dielectric or armored construction
Available in hybrid constructions
(singlemode and multimode)
Excellent crush and impact resistance
High pulling force
Easy to install
UV resistant outer sheath
All cables tested to EIA/TIA FOTP standards
Rodent-resistant armoring
Wide operating temperature range:
-40° to 70 °C (-40° to 158 °F) •
•
•
•
•
•
•
•
•
•
•
•
Excellent above and below ground reliability
Low attenuation for optimum
signal reliability
2-288 fibers available
Applications:
Campus backbone cabling
Outdoor installations: aerial, duct,
and direct burial
Harsh climates where rugged cable
construction is needed
Compliances:
GR-20-CORE
EIA/TIA FOTPs
•
•
•
•
•
•
•
•