Samsung LS24D360HL-ZA - Manual (Page 61)

61
Setup and Reset
6
6 Setup and Reset
6.4 PC/AV Mode
Set PC/AV Mode to AV . The picture size will be enlarged. This option is useful when you view a movie.

This function does not support Analog mode.

Supplied for the wide models only such as 16:9 or 16:10.

If the monitor (when set to HDMI) is in power saving mode or is displaying the message
Check Signal Cable , press the MENU button to display the On Screen Display(OSD).
You can select PC or AV .
6.4.1 Configuring PC/AV Mode
1
Press any button on the front of the product to display the Function Key Guide. Next, press [ ] to
display the corresponding menu screen.
2 Press [ ] to move to SETUP&RESET and press [ ] on the product.
3
Press [ ] to move to PC/AV Mode and press [ ] on the product.
4 Press [ ] to move to HDMI and press [ ] on the product. And press [ ] again.
The following screen will appear.
5 Press [ ] to move to the option you want and press [ ].
6
The selected option will be applied.
MENU
SETUP&RESET
AUTO
Off
Acceleration
Auto
Reset All
Eco Saving
Off Timer
PC/AV Mode
Key Repeat Time
Source Detection
Set to AV to enlarge
the picture.
PC/AV Mode
AUTO
HDMI PC
AV
Select the PC/AV mode
for the HDMI source.