Samsung SWC-R640LBAXAR - Manual (Page 134)

129
• Check <Item>: Allows you to check your phone's status (that is, signal
strength, battery, and more in the same report), voicemail, messages,
missed calls, time, signal strength, battery, volume, and My number.
• Contacts <Name>: Allows you to look up and display contact
information for any name stored in your Contacts list by saying the
name. (For more information, refer to “Finding a Contacts
Entry” on page 64.)
• Redial: Redials the last number dialed.
• Help: Shows a description of Voice Commands.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, you are prompted to
repeat the command. If, after a few more seconds, the command is not
recognized, the message “Sorry, no match found,” is audible, then voice
recognition cancels.
Voice Command Tips:
• Make sure you wait for the beep before speaking.
• Speak clearly at a normal volume, as if you were talking on the phone.
Voice-Activating Your Contacts List
When you first start Voice Service, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, Voice Service automatically reloads and
voice-activates the entire list.