Samsung EC-WB2200BPBUS - Manual (Page 128)

Settings menu
Settings 127
Connectivity
* Default
Item Description
Video Out
Set the video signal output for your region.
• NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
• PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
Anynet+
(HDMI-CEC)
Turn on to control the camera with a TV remote control when
you connect it to an HDTV that supports the Anynet+(CEC)
profile.
• Off: View files without using an HDTV remote control.
• On*: Control the camera with an HDTV remote control.
HDMI Size
Set the resolution of photos when the camera plays back files on
an HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p)
• If the HDTV does not support the selected resolution, the
HDTV automatically selects the next lower resolution.
i-Launcher
Set i-Launcher to launch automatically when you connect your
camera to your computer. (Off, On*)
* Default
Item Description
Display
Brightness
Adjust the brightness of the screen. (Auto*, Dark, Normal,
Bright)
Normal is fixed in Playback mode even if you have selected
Auto.
Quick View
Set whether or not to review a captured image before returning
to the Shooting mode. (Off, On*)
This feature does not work in some modes.
Auto Display
Off
If you perform no operations for 30 seconds, the camera
automatically switches to Auto Display Off mode. (Off*, On)
In Auto Display Off mode, press any button other than [X] to
resume using the camera.