Samsung LS22D300NY-ZA - Manual (Page 36)

36
Preparations
1
1 Preparations
1.3.2 Attaching the Stand (S20D300BY / S20D300H / S20D340H / S20D300HY /
S20D340HY / S22D300BY / S22D300HY / S22D340HY / S22D300NY / S24D300B /
S24D300BL / S24D300H / S24D340H / S24D300HL / S24D340HL)
Before assembling the product, place the product down on a flat and stable surface so that the screen
is facing downwards.
Insert the stand neck into the
stand base in the direction
shown in the figure.
Check that the stand neck is
firmly connected.
Tightly fasten the connecting
screw at the bottom of the
stand base.
Place a soft cloth over the table
to protect the product and
place the product onto the
cloth so that the front of the
product is facing downwards.
Hold the main body of the
product with your hand as
shown by the figure.
Push the assembled stand into
the main body in the direction
of the arrow as shown in the
figure.
- Caution
Do not hold the product upside
down only by the stand.
DP IN RGB IN DVI IN DP IN RGB IN DVI IN
DC 14V RGB IN