Samsung DVD-R120-XAC - Manual (Page 3)

Step
Step Setup
Wait! Make sure you complete Step before proceeding
with Step .
After all connections are complete, plug the power cord in the wall
outlet. "Auto" appears in the panel display. This means that the
current time is being set automatically (Auto Program) through the
antenna under connection and also the channel is being set. The
setup may take a few minutes. When it normally operates, the current
time is automatically set and displayed in the front panel display.
You must have the antenna connected to automatically set the clock.
For ease of use, we recommend that you complete the following
settings before using the DVD Recorder.
Turn on your TV and any other connected equipment
Input Selector
OSD(On-Screen Display) Language Setup
Clock Set
Channel Set
Audio Setup
Video Setup
Turn on your TV and any other connected
equipment
Input Selector
Press the Input Selector on your TV remote control until the
signal from the DVD Recorder appears on the screen.
OSD Language Setup
Press the DVD
POWER button.
The initial set up OSD
language menu will
appear.
Select the desired
language using the
number buttons.
Clock Set
With the unit in Stop
mode, press the MENU
button.
Select Setup using the
…/†buttons, then press
the √ or ENTER
button.
Select System using the
…/† buttons, then
press the √ or ENTER
button.
Select Clock Set using
the …/† buttons, then
press the √ or ENTER
button.
Select Auto Clock Set using the …/† buttons, then press the
√ or ENTER button.
Select On using the
…/† buttons, then
press the √ or ENTER
button.
The DVD Recorder automatically sets the clock by searching for a
channel that carries a time signal and sets your time zone and
daylight saving(if applicable).
RETURN SELECT MOVE EXIT
Setup No Disc
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN SELECT MOVE EXIT
System No Disc
Clock Set √ √
Channel Set √ √
CM Skip Time : 15 Sec √ √
EP Mode Time : 6 Hours √ √
Chapter Creator : Off √ √
RETURN SELECT MOVE EXIT
Clock Set No Disc
Auto Clock Set √ √
Manual Clock Set √ √
RETURN SELECT MOVE EXIT
Auto Clock Set No Disc
Auto Clock Set : On √ √
Clock Data CH : Automatic √ √
Time Zone : Automatic √ √
Daylight Saving : Automatic √ √
Off
On
-
-
-
-
3
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
00684A_quick guide_DVD 2/17/05 9:57 AM Page 3