Wi-fi direct, Hotspot, Bluetooth settings – Samsung SM-T217SZKASPR User Manual
Page 89
•
Install certificates: Install security certificates you’ve downloaded, or from
device storage.
•
MAC address: View your tablet’s MAC address, needed for connecting to some
secured networks. (Not configurable.)
•
IP address: View your tablet’s IP address. (Not configurable.)
WPS push button: Set up a connection to a WPS (Wi-Fi Protected Setup) router or
other equipment.
WPN PIN entry: View the PIN used by your tablet to set up a PIN-secured
connection to a Wi-Fi router or other equipment. (Not configurable.)
Help: Get help using Wi-Fi.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly via Wi-Fi, without a Wi-Fi network
or hotspot, and without having to set up the connection.
For information about using Wi-Fi Direct, see
Hotspot
Use your tablet as an Internet Access Point (AP) using Hotspot. This allows other devices to
connect to the AP via a Wi-Fi network—giving the connected devices access to the Internet.
Connect a Device
1. Press
and then touch
> Settings > Hotspot.
2. Touch the ON/OFF switch to enable Hotspot.
3. On the target device, activate Wi-Fi. Then scan for Wi-Fi hotspots. Select the name of
your table to connect.
4. On your tablet, follow the prompts to connect the target device.
Bluetooth Settings
Bluetooth is a short-range communications technology that allows you to connect wirelessly to a
number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled
handhelds, computers, printers, and wireless devices.
For more information about using Bluetooth, see
1. Press
and then touch
> Settings.
Settings
80