Samsung CW29M026V7XXEC - Manual (Page 10)

W
se
la
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆ Change channels and adjust the volume
◆ Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button Viewing Function Menu Function
Used to display the next -
stored channel.
Used to display the previous -
stored channel.
to Used to display the corresponding channels.
-/-- Used to select a channel numbered ten or over.
Press this button, and the “--” symbol is displayed.
Enter the two-digit channel number.
PRE-CH Press the PRE-CH button. The TV will switch to the last
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the number button to select
second channel. Then, use the PRE-CH button to quickly
alternate between them.
Used to increase the -
volume.
Used to decrease the -
volume.
MUTE Used to switch the sound off temporarily.
➢
To turn the sound back on, press this button again, or
press the
or button.
MENU Used to display the Used to return to the previous
on-screen menu system. menu or normal viewing.
- Used to:
◆ Display a submenu
containing selections for
the current menu option
◆ Increase/decrease a
menu option value
- Used to confirm your choice.
EXIT - Used to exit from the menu
system and return to normal
viewing directly.
TV Used to switch the
television on when it is
in Standby mode.
English - 10
AA68-03660A-00Eng 6/7/05 4:46 PM Page 10